Pages

Wednesday 26 October 2016

French Infantry - painting masterclass

Just to whet your appetite a little more - here are some photos of the figures Richard Hattersley has painted up for the packaging artwork - not bad I suppose?

I think that these look some of the nicest figures so far - well done Chris and Richard.





Now he needs to paint some fighting units - and Prince August need to get them into production!

Sunday 16 October 2016

French - Swiss Guards

In case anyone is still interested in the French infantry - I thought I would post pictures of a unit I have just completed.

I went for the march attack figure with the coat tails loose, as these are something a little different. I decided to paint them as Swiss Guard as I fancied some for my French 'Karoliner' army. (They would probably have been better with turn backs, but I wanted to try the figure without them.)









With the lose coats the range has become useful for earlier periods.

You should be able to put them on your Christmas list!

Friday 2 September 2016

Cavalry - Digital Sculpting

Austrian Cuirassier

Trooper


Back in July last year I posted a picture of the 'green' for the Austrian cuirassier, which received encouraging feedback.


Soon afterwards PA decided to move over to digital sculpting. The changeover has not been as smooth as hoped, and nothing has been added to the range since the Russians, which were that last of the traditional sculptures. Things are now moving again, the French infantry are ready to go, with a few production problems being ironed out.

The figure has now been replicated digitally, and we think it is pretty much complete. In response to  comments last year the reins have been stylised a little to give the impression of being double, without making the area around the bit too heavy 


There are a couple of minor changes I have asked Chris to make:
  • Modify the buckle positions on the harness, remove the top one at the intersection and replace with two more on the straps below.
  • Add a line around the holster cover similar to the one on the saddlecloth.
I think it looks very nice, if there are any error/omissions please let me know.

Trumpeter


Progress on this is not quite as advanced, and the horse, sword etc. will be replaced with the one above - so please just consider this as a taster.

I asked him to base the pose on the old Holger Eriksson mould PA26, and I think it will end up looking great.



Officer and Standard Bearer


There will also be an officer with a sword pointing forwards and a standard bearer, both based on the trooper.  Progress is not sufficient to show, as the plan is to tidy up everything on the trooper first and move on from there.

Dragoons

Once the Austrian cuirassier are complete, in order to keep things moving we are considering issuing a 'Prussian' dragoon mould. This will just provide torsos and heads to fit the same horse, and would contain:
  • Trooper, similar to above unless there are any suggestions (needs to fit this horse)
  • Officer
  • Drummer
  • Standard bearer
Dragoons were pretty generic, and with minor changes such as tricorn style and the way the carbine is slung (it will be separate) the Austrians, Prussians, French  and quite a few others could be covered.

If we can squeeze them it we could add some horse grenadier heads - if not they will have to be taken from the infantry.

Russian Cavalry

Unlike the Austrians, Prussians etc the Russians had their sword belts on the outside of the coat, so these will need some additional moulds.

The French cuirassiers also had belts on the outside.

Prussian Cuirassiers

These will need separate moulds as they wore coats with shorter tails.



..............as always comments welcome.








Friday 26 August 2016

French Infantry Update..............again

Nothing very exiting, just the mould listing for the French infantry, which are sculpted and waiting for packaging design etc.

I have not seen the moulds yet, but they look OK from the images I have.


 Mould 3113 - Infantry in full coat - march attack and advancing


1.  March attack figure
2.  Arm & musket for march attach
3.  Fusilier head - tricorn
4.  Sword
5.  Grenadier head - bearskin
6.  Sword
7.  Advancing figure

(The casting has a groove in the coat to accept the sword, which is fine early war, and for those troops which carry a sword.
If you don't want a sword there might be a bit of work to fill the groove if it doesn't paint over).









Mould 3114  - Infantry in  with coat turned back - march attack and advancing 


1.  March attack figure
2.  Arm & musket for march attach
3.  Fusilier head - tricorn
4.  Bonnet-de-police head
5.  Sword
6.  Fusilier head - tricorn
7.  Sword
8.  Advancing figure











Mould 3115   Drummer and officer


1.  Drummer body
2.  Sword
3.  Fusilier head - tricorn
4.  Officer head  - tricorn
5.  Officer body
6. Grenadier head - bearskin













Mould 3116  Standard Bearer and NCO


1.  NCO body
2.  NCO partisan
3.  Officer bare head  - with curled wig
4.  Grenadier head - tricorn (moustache)
5.  Officer head - tricorn
6.  Standard  bearer  body
7.  Officer's sword












As I said, I haven't got my hands on any of these moulds yet, but they do exist and cast - so hopefully not too long now (have I said that before)! 





Saturday 18 June 2016

Battle of Chotusitz

Last weekend I spent a very enjoyable weekend with a group of gamers from the AMG (A Military Gentlemen) group, which is a group of gamers with a general interest in 18th Century Gaming.
http://amilitarygentleman.blogspot.co.uk/
A group very worth joining - to do so you will need to buy the book 'A Military Gentleman' from the above website - a very nice book - but not cheap.

Over the two days we played the Battle of Chotusitz twice, using the 40mm semi flats on a 12'x6' table. The table was of a size which allowed us to represent each of the units shown on the map below with one of my gaming units of either 16 infantry or 8 cavalry.


Figures were a bit of a hotchpotch:
  • There were 16 units of Austrian infantry, of which about half were my new SYW Austrians and Hungarians - the remaining units being white coated French.
  • The 17 units of Prussian infantry were all blue coated 'Prussians', again about half new and the rest 'Karoliners'.
  • The 25 units of cavalry were just a mix of what we have (not helped by the fact that I left 6 units at home!). Like many of you I am waiting for the new Cuirassiers.
The initial Prussian starting  positions are shown below, however we did remove the two long ranks of foot which were still on the march when the battle started. Only the exposed units of Leopold's foot, the 24pdr battery and Buddenbrock's foot were available when the battle started.


And the long lines of Austrians eager to crush the Prussians in front of them before Frederick arrived with the bulk of the infantry.


I took a few photos, but not really with sufficient regularity to describe the game, so I will just show a few shots of interest.

Part way through the cavalry melee on the west of the field. The Austrians are gettingthe better of it, but there is no way I can tell you who is who!


In more detail - just to show off my new Russians (Austrians today).



And at the other end of the field, east of Chotusitz, another very confused cavalry melee  - again I can't remember which units were Prussian and which Austrian!


And the Austrian infantry assault on the centre, after seeing off Leopold they are confronted by Frederick's infantry lines.


The situation just prior to the end of the second game. The infantry in Frederick's 'square' is pretty much all that remains; Leopold's infantry and most of the cavalry having been swept from the field. Shortly after this point the far end of the square caved in under a combination of short range musketry followed by a charge of the Austrian cavalry; at which point we called it an Austrian victory.


The games were played with the 'Field of Battle' rules, which allowed the games to be played to a conclusion on both days. The card driven approach gave rise to some odd/amusing swings in play, which most players enjoyed.

There are some more photos on Mark Dudley's blog:

And just something which might be of interest - Chris has found space in one of the moulds for an officers head without a hat - oh the shame!


Thursday 2 June 2016

French Infantry - Sculpting Complete!

I've not posted anything for over a month, so I thought it time for an update - just to show I am still here!

It's been a long learning process..........however I'm pleased to say that Chris has now finished the sculpting of the French infantry - and they have been tweaked a bit to make them fit in even better with the older figures.

He has also taken the opportunity to add two new figures - a standard bearer:



And also an NCO without turnbacks (so the chap with a sword I discussed in the last post is an officer).


In addition to the tricorns there will be a grenadier head




And a bonnet de police (not quite finished)


The 3D printing is now all sorted, below is a casting of the French infantryman with turnbacks advancing (right), shown alongside an advancing Austrian (er left), as you can see they are a pretty good match. (Since this version the facial features exaggerated a little, and the tricorn enlarged, see image).





I should get a set of test moulds shortly - AND THEN THE CAVALRY!

Friday 22 April 2016

French Infantry - Drummer and NCO

Attached are the two latest digital sculpts for the French.

Drummer


There is a drummer, without turn backs.



NCO


Also there has been a change of plan since the last blog - it has been decided to add an 'early war' NCO. This figure should be more useful than another standard bearer (the Prussian or Russian will do fine), as he can be used for the War of Austrian Succession. Currently he is shown with the sword option, but will also carry a pole arm.

He should also make an alternative officer who has chosen to wear the belt outside on campaign.


PA are stating on their blog that they will be releasing the digitally sculpted Mithril Miniatures in the next few months, so hopefully I should get some sample SYW moulds soon!

As always comments welcome.